Reference Manual

Wireless Configuration

ProSafe 16 AP Wireless Management System WMS5316

point that supports wireless-n mode run in b/g mode in order to support clients that do

not support wireless n technology.

• 2.4GHz or 5GHz band selection: This selection affects only dual band access points

that can be set to only one band at a time. You can use this field to specify which band

the access point should use.

Note: For dual concurrent access points, both radio modes are enabled by

default.

4. Click Apply so that your changes take effect.

Advanced Wireless Settings for Access Point Groups

This screen is for advanced users who wish to control the WLAN settings of the access

points manually.

 To manually specify the WLAN parameters for access points:

1. On the Configuration tab, select Wireless > Basic > RF Management, and disable the

Central RF Management on the Wireless Settings screen.

This prevents the wireless management system from automatically using RF

management and adjusting power and channel settings for the access point group.

2. On the Configuration tab, select Wireless > Advanced > Wireless Settings:

3. Specify the settings in this screen (see Table 1, Advanced Wireless Settings for a description

of the fields).