Reference Manual

48 | Chapter 7: Maintenance
ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
Rebooting an Access Point Group
On the Maintenance tab select Reset > Access Points > Reboot:
1. Select the group of access points to be rebooted using the tabs. Access points not
assigned to a specific group belong to Group 1.
2. Select the Yes radio button.
3. Click Apply to reboot the access points in the selected group.
SNMP
You can use SNMP for the wireless management system or advanced SNMP for access
point groups. Enable SNMP to allow the SNMP network management software, such as HP
OpenView, to monitor the wireless management system by using SNMPv1/v2 protocol.
SNMP for the Wireless Management System
On the Maintenance tab, select System > SNMP:
• SNMP: Select this check box to enable SNMP for the wireless management system.
• Read-Only Community Name: The community string that allows the SNMP manager to
read the WMS5316 MIB objects.
• Read-Write Community Name: The community string that allows the SNMP manager to
read and write the WMS5316 MIB objects.