Quick Reference Guide

38 | Chapter 5: Monitoring
ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
Profile Information
The section displays configured and enabled security profiles on the access point.
• Type: 802.11 b/bg/ng or 802.11 a/na mode for the security profile.
• SSID: Wireless network name.
• Security: The mode of security configured for the profile.
• VLAN: VLAN configured for the security profile.
Client Information
This section displays client station information for the access point.
• MAC: Wireless MAC address of the access point client.
• SSID: Wireless SSID configured on the managed access point to which the client
connects.
• Channel: The channel that the client is using to connect.
• Mode: The mode (802.11 b/bg/ng or 802.11 a/na) for the security profile.
• Auth: The security authentication mode (open, WEP, WPA, or WPA2).
Rogue Access Points
This section displays rogue or neighboring access points detected by the managed access
point.
• Rogue Access Points Reported.
• Rogue Access Points in same channel.
• Rogue Access Points in interfering channels.
Client Status
On the Monitoring tab select Summary > Advanced > Client Status:
The Client Status list specifies detailed information about each client node currently
associated with managed access points.