Wireless Cable Modem Gateway Reference Manual

Reference Manual for the Model CG814M Wireless Cable Modem Gateway
Connecting the Gateway to the Internet 2-9
Now that the gateway, and the computer are turned on, verify the following:
• When power on the gateway was first turned on, the PWR light went on, the numbered
LAN LEDs turned on for a few seconds.
• The gateway’s LOCAL LINK/ACT lights are lit for any computers that are connected to
it.
• The gateway’s Cable Link LED is lit, indicating a link has been established to the cable
service provider.
3. Next, use a browser like Internet Explorer or Netscape to log in to the gateway at its default
address of http://192.168.0.1.
Figure 2-2: Log in to the gateway
A login window opens as shown in Figure 2-3 below:
Figure 2-3: Login window