Wireless Cable Modem Gateway Reference Manual

Reference Manual for the Model CG814M Wireless Cable Modem Gateway
Connecting the Gateway to the Internet 2-5
Connecting the CG814M Gateway
Before using your modem, you need to do the following:
• Connect to your computer, using either Ethernet, USB or wireless (see page 2-6).
• Connect the line from your cable service provider to the cable port of the gateway (see page
2-7).
• Connect the power adapter (see page 2-8).
A typical installation is shown in Figure 2-1, below
Figure 2-1: Typical installation using Ethernet.
Connecting to Your Computer
Your computer will attach to either the Ethernet, USB or wireless ports on the CG814M Gateway.