Quick Reference Guide

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
Maintenance 6-7
202-10042-02 v1.1
From the Router Status screen, click the Connection Status button to display the connection status,
as shown below.
Figure 6-5: Connection Status screen
This screen shows the following fields:.
Click the Renew button to renew the DHCP lease. Click the Release button to disconnect from the
WA N.
Table 6-1. Connection Status Fields
Field Description
IP Address The WAN (Internet) IP Address assigned to the wireless range extender.
Subnet Mask The WAN (Internet) Subnet Mask assigned to the WGX102.
Default Gateway The WAN (Internet) default gateway the WGX102 communicates with.
DHCP Server The WAN (Internet) DHCP server IP address.
DNS Server The WAN (Internet) DNS server IP addresses on the network.
Lease Obtained The length of time the wireless range extender has been connected to your Internet
service provider’s network.
Lease Expires The length of time before the lease expires.