Quick Reference Guide

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
5-6 Wireless Configuration and Security
202-10042-02 v1.1
Default Factory Settings
When you first receive your WGX102, the default factory settings are shown below. You can
restore these defaults with the factory default reset button on the bottom of the unit.
After you install the Wireless Range Extender, use the procedures below to customize any of the
settings to better meet your networking needs.
FEATURE DEFAULT FACTORY SETTINGS
Wireless Access List (MAC Filtering) All wireless stations allowed
SSID broadcast Enabled
SSID NETGEAR
802.11b/g RF Channel 11
Mode g and b
Authentication Type Automatic
WEP and WPA-PSK Disabled