Quick Reference Guide

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
3-8 Installing the Wireless Range Extender
202-10042-02 v1.1
– A static IP address of 192.168.0.210 and 255.255.255.0 as the Subnet Mask
b. Restart this computer so that these settings take effect.
3. Connect to the WGX102 by opening your browser and entering http://192.168.0.101 in the
address field.
Figure 3-8: WGX102 Login IP Address
4. When prompted, enter admin for the user name and password for the password, both in lower
case letters.
5. Click Wireless Settings in the Setup section of the WGX102 main menu. You will then see
the Wireless Settings menu.
Figure 3-9: WGX102 Wireless Settings
6. Enter the Network Name (SSID) and wireless security settings for your wireless network.
Be sure to click Apply to save your changes.
Since you are connected to the WGX102 wirelessly, you will be disconnected after applying
changes to the WGX102 wireless network name or security settings.
7. Assure that the IP address settings match those of your existing router.