Quick Reference Guide

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
2-4 Introduction
202-10042-02 v1.1
Connectors, Reset Buttons, Ports, and Label Information
Each unit has various status indicators, a reset button, and a label with important information.
Familiarize yourself with these features of your product.
The WGX102 Wireless Unit
The front panel of the WGX102 contains the status lights described below.
Figure 2-1: WGX102 Front Panel
Table 2-1. Status Light Descriptions
Label Activity Description
Power On Green Solid
Blink
Off
Power is supplied to the WGX102.
Power on self test.
Power is not supplied to the WGX102.
HomePlug — AP Mode
Internet — Router Mode
On
Off
The HomePlug port (or Internet port in Router Mode) has
detected a link with an attached device.
No devices are attached on the Powerline network.
Wireless On
Blink
Off
The Wireless port is initialized and the wireless feature is
enabled.
Data is being transmitted or received by the wireless port.
There is a problem with the device. See Chapter 8,
“Troubleshooting”.