User's Manual
Table Of Contents
- Reference Manual for the 54 Mbps Wireless Router WGR614 v5
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Prepare to Install Your Wireless Router
- First, Connect the Wireless Router to the Internet
- Now, Set Up a Computer for Wireless Connectivity
- Troubleshooting Tips
- Overview of How to Access the Wireless Router
- How to Manually Configure Your Internet Connection
- Using the Smart Setup Wizard
- NETGEAR Product Registration, Support, and Documentation
Reference Manual for the 108 Mbps Wireless Firewall Router WGR624v3
3-12 Connecting the Router to the Internet
July 2004 202-10036-01
How to Bypass the Configuration Assistant
1. When the wireless router is in the factory default state, type
http://www.routerlogin.net/basicsetting.htm in the address field of your browser, then click
Enter.
When the wireless router is in the factory default state, a user name and password are not
required.
2. The browser will then display the WGR624v3 settings home page shown in “Login result:
WGR624v3 home page” on page 3-11.
If you do not click Logout, the wireless router will wait 5 minutes after there is no activity
before it automatically logs you out.