Quick Reference Guide

Reference Manual for the 54 Mbps Wireless Travel Router WGR101
5-2 Management
February 2005 (202-10034-03)
This screen shows the following parameters:
Table 5-1. Menu 3.2 - Wireless Travel Router Status Fields
Field Description
Hardware version This field displays the hardware version of the router.
Firmware Version This field displays the router firmware version.
Wireless Access Point These parameters apply to the Wireless port of the router.
Name (SSID) This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR-TRAVEL.
Region This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Channel Identifies if the channel the wireless port is using. See “Wireless
Channels” on page D-2 for the frequencies used on each channel.
Mode Identifies if the 802.11 mode: g and b; g only; b only.
Wireless AP Identifies if the access point is on.
Broadcast Name Identifies if the access point is broadcasting the SSID.
Wireless LAN
(multi-user mode only)
These parameters apply to the wireless LAN (WLAN) port of the router.
MAC Address This field displays the Media Access Control address being used by the
WLAN port of the router.
IP Address This field displays the IP address being used by the WLAN port of the
router. The default is 192.168.0.1
DHCP Identifies if the router’s built-in DHCP server is active for the WLAN
attached devices.
IP Subnet Mask This field displays the IP Subnet Mask being used by the WLAN port of
the router. The default is 255.255.255.0