Quick Reference Guide

Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Introduction 2-7
February 2005 (202-10034-03)
The Router’s Rear Panel
The rear panel of the router is shown below.
Viewed from left to right, the rear panel contains the following features:
Figure 2-3: WGR101 Rear Panel
• Reset: This push button can reset the router to the last settings, or reset to the factory default
settings.
• Ethernet: This port is used for Internet (WAN) connection via an RJ45 wall port, router, or
cable modem. It is also used as a LAN port to connect the router to a local computer.
• Power: The AC power adapter outlet.
If you want to: Hold Reset button down Release Reset button
Reset After power-on When power LED is still on
Reset to factory After power-on for about five
seconds
When the Power LED is flashing
Power
Ethernet
Reset
WAN/LAN Port
Button