Quick Reference Guide

Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Introduction 2-5
February 2005 (202-10034-03)
The Router’s Switch
Figure 2-1: WGR101, Side View
The side of the 54 Mbps Wireless Travel Router WGR101 has a four-position switch. It ships in
position 1, which is used when connecting to the router as a single user. The switch position
functions are as follows:
• Switch position 1: single wireless computer only access, no configuration access
• Switch position 2: configuration and multiple wireless computer access
• Switch position 3: configuration only via Ethernet or wirelessly connected computer
• Switch position 4: unused at this time
For information about changing the switch position for multiple computers to share the 54 Mbps
Wireless Travel Router WGR101, or to configure WEP security, refer to “Setup Options
Overview” in Chapter 3.
