User's Manual
Table Of Contents
- Trademarks
- Statement of Conditions
- Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
- Canadian Department of Communications Compliance Statement
- Product and Publication Details
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Basic Installation and Configuration
- Overview of Wireless USB Print Server Setup
- Verify Printer and Network Readiness
- Understanding WGPS606 Wireless Security Options
- Observe these Precautions
- Set Up the Print Server
- Now, Set Up a PC
- Troubleshooting Tips
- Two Ways to Log In to the WGPS606
- Using the IP Settings Options
- Understanding the Basic Wireless Settings
- Chapter 4 Management
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting
- Appendix A Specifications
- Appendix B Wireless Networking Basics
- Glossary
Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch
Specifications A-1
Draft 1, 01 Feb 05
Appendix A
Specifications
This appendix provides the NETGEAR WGPS606 54 Mbps Wireless USB Print Server with 4-
Port Switch WGPS606 technical specifications.
Specifications for the WGPS606
Parameter
NETGEAR WGPS606 54 Mbps Wireless USB Print Server with 4-Port
Switch WGPS606
Radio Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing
Frequency 2.4-2.5Ghz
Data Encoding:
Direct Sequence Spread Spectrum (DSSS) for 802.11b and Orthogonal
Frequency Division Multiplexing (OFDM) for 802.11g
Wireless Security: WEP and WPA-PSK
Network Management Web-based configuration and status monitoring
Status LEDs Power/Ethernet LAN/Wireless LAN
Dimensions:
Power Adapter
Weight 845 g (29.7 oz)
Electromagnetic
Compliance
FCC Part 15 Class B and Class E, CE, C-tic AS/NZS 3548, Telec STD-T66,
VCCI
Environmental
Specifications
Operating temperature: 0 to 50° C
Operating humidity: 5-95%, non-condensing