User's Manual

Table Of Contents
Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch
Basic Installation and Configuration 3-9
Draft 1, 01 Feb 05
How to Log in Using the Default IP Address of the WGPS606
1. 192.168.0.201 is the default IP address of your access point. However, the WGPS606 is also
set, by default, to be a DHCP client. So, if the WGPS606 has not yet been installed, and there
is no DHCP server on the network, you can log in to the WGPS606 using its default IP
address.
Note: The computer you are using to connect to the WGPS606 should be configured with an
IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
2. Open a Web browser such as Internet Explorer or Netscape Navigator.
3. Connect to the WGPS606 by entering its default address of http://192.168.0.201 into your
browser.
4. A login window like the one shown below opens:
Figure 3-4: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find
the Wireless USB Print Server and display the home page, as shown in “Login result:
WGPS606 home page” on page 3-10.
192.168.0.201