User Manual

Changing the Password for the Bridge
1. Start your browser software.
2. Type http:// followed by the IP address for the bridge as the Web address and press Enter
(or Return).
Note: The default value is 192.168.0.201. If you’ve set the
bridge to use DHCP, check the router table to find out
what the currect address is for the bridge.
You’ll see the Status page.
3. To change the password, click
Change Password.
4. Type admin as the User ID and type the current password (password is the default) as the
Password.
5. Click OK.
6. Type the old password in the Old Password box.
7. Type a new password in the New Password box.
8. Re-type the new password in the Confirm Password box.
9. Click Apply.
10. If you are through making changes, click Logout.
12
need a screenshot of
the Change
Password page