Reference Manual

Troubleshooting Tips

Symptom

The WGE101

doesn’t show up in

the device list.

Cause

There’s a hardware

problem.

Solution

• Check that the bridge’s power light

is on.

• Check that the Ethernet cable is

securely connected to both the

computer and the bridge.

• If operating through a switch (or

hub), check that the bridge’s and

the switch’s (or hub’s) power lights

are on.

• If operating through a switch (or

hub), check the Ethernet cable

connections between the computer

and the switch (or hub) and

between the bridge and switch (or

hub).

If you have problems using the Smart Navigator software, check these tips.