User's Manual

Jan./7
th
/2003
2
Configuring the Wireless LAN Access Point
The 802.11g Wireless LAN Access Point allows configuration either via the configuration
utility, known as Web Management, or remote access through TCP/IP (Telnet) connection.
Web Management
The built-in Web Management provides you with a set of user-friendly graphical user
interfaces (web pages) to manage your Wireless Access Point. With the assigned IP
address (e.g.
http://192.168.1.1) to the Access Point, you may get access to the Access
Point Web Pages via a web browser (Netscape Navigator 3.0 ~ 4.5 or MS Internet
Explorer 4.0 and later) to monitor and configure the Wireless LAN Access Point.
1. Open your web browser.
2. Enter the IP address of your Wireless Smart Station Adapter in the Address field (e.g.
http://192.168.1.1). You will have access to the 802.11g Wireless LAN Access Point
Web Pages of the Wireless LAN Access Point.
3. Enter the password to login to the Wireless LAN Access Point. The default password is
default. The main page will show up.
NOTE: The default password to get access to the Access Point is “default”.
The Wireless LAN Access Point main page contains five items for you to manage your
Wireless LAN Access Point.