User's Manual
Table Of Contents
- Installation Guide for the Model WG511 802.11g Wireless PC Card
- Contents
- Chapter 1 Introduction
- Chapter 2 Installing the WG511 802.11g Wireless PC Card
- What You Will Need Before You Begin
- Two Basic Operating Modes
- WG511 Default Wireless Configuration Settings
- Using the WG511 to Connect to a Wireless Access Point Network in Infrastructure Mode
- Setup Instructions
- Using the WG511 to Connect in Ad-Hoc Mode
- WG511 Wireless Connection Indicators
- Troubleshooting Tips
- Chapter 3 Protecting Your Wireless Connection
12
Install the WG511 driver
and configuration utility
software.
a. After inserting the WG511
802.11g Wireless PC Card,
the Windows 98/Me Add
New Hardware Wizard is
displayed. Click Next, select
Search for the best driver
for your device
(Recommended) and click
Next again.
b. Windows 98/Me prompts
for the location of the driver.
Click the CD-ROM drive
box and click Next to
proceed. The wizard will
install both the driver and
the configuration utility. If
Windows requests the
Windows operating system
files, insert the Windows 98/
Me CD and follow the
prompts to proceed.
c. After the installation
completes, click Finish.
d. Click Yes when asked if you
want to reboot the system.
e. You should now see the
Windows system tray icon
on the right in the lower
right portion of the
Windows task bar.
Windows 98/Me Add Hardware Wizard
WG511 LAN Configuration Utility
System Tray Icon