User's Manual

Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
2-6 Basic Setup
Configure your WG311T and save the
Profile.
a. Open the WG311T Smart Wireless
Configuration Utility by clicking on the
icon in the Windows system tray. The
utility opens to the Settings page.
b. Change the Network Name SSID to
match your network.
Tip: As an alternative to typing in the
SSID, you can use the Network tab to
view the available wireless networks.
Double-click on the desired network.
c. Click Apply to activate the connection.
d. Enter a name for your profile and click
Save Profile to store the current settings.
Tip: If you use your notebook PC to
connect to a wireless network at work
and at home, create profiles called work
and home.
Note: This procedure assumes your wireless
network is not using security. If your wireless
network uses WEP or WPA-PSK, set up your
WG311T accordingly. To view the wireless
security settings help, click the Help button.
Click the system tray icon to open the Smart Wireless
Configuration utility.
WG311T Configuration Utility
Note: The NETGEAR default settings are
Infrastructure mode, with ANY for the wireless
network name SSID, and WEP disabled.