Application Note

NETGEAR

Internet Access RouterFirewall

LOCAL

PWR TEST

1 2

LNK

INTERNET

ACT

100

LNK/ACT

MODEL

FR314

Router

192.168.0.1

Wireless Clients 192.168.1.2-192.168.2.50

Wired device 192.168.0.x

192.168.0.228

WG302v2/WAG302v2

In the above example, the wired network where the router and the access point resided is

192.168.0.0/24. When enabling the DHCP server on the WG302v2/WAG302v2, the DHCP

network must be in a different subnet than 192.168.0.0/24. In our example, we use

192.168.1.0/24.

To enable DHCP server on the WG302v2/WAG302v2, go to Advanced->IP Settings in the access

point’s management interface. Select the radio button to enable DHCP server. Enter the starting

and ending IP Address of the DHCP pool, subnet mask, gateway IP address, primary and

secondary DNS server addresses, primary and secondary WINS server addresses and lease

time. Click Apply.