User's Manual

User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
Basic Setup 3-7
202-10065-01
Configure your WG111U.
a. Click the icon on the Windows
desktop or in the system tray to open the
WG111U Smart Wizard Wireless
Settings Utility.
The utility opens to the Settings tab
page.
Click Help for instructions on using the
Smart Wizard Wireless Utility.
b. Change the Network Name SSID and
security Passphrase to match your
network.
Note: The NETGEAR default settings
are Infrastructure mode with
NETGEAR_11g for the wireless
network name SSID, and WPA-PSK
security is enabled. If your WLAN
settings are different from the
NETGEAR default settings, you will not
connect. Set up your WG111U
accordingly.
Tip: As an alternative to typing in the
SSID, you can use the drop-down list or
the Networks tab to view the available
wireless networks, and choose the one
you want.
c. Click Apply to activate the connection.
You can also enter a profile name and
click Save Profile to store the current
settings.
Tip: Create profiles called work and
home. Then, activate whichever one you
need for your current location.
WG111U system tray icon
Smart Wizard Wireless Utility Settings page
Tip: Click Help to view the context-sensitive help
information.
Note: This procedure assumes you are connecting
to a wireless network which is using WPA-PSK
security. If your network includes WEP or does not
use security settings, click the Settings tab and
configure the WG111U accordingly. For help with
these steps, click the Help button or see
“Understanding the Security Options” on page 5-1.
Click here to open the configuration utility.