Quick Reference Guide

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Management 4-5
November 2005
Viewing a List of Attached Devices
The Available Wireless Station List contains a table of all IP devices associated with the wireless
access point in the wireless network defined by the Wireless Network Name (SSID). From the
main menu of the browser interface, under the Information heading, click the Available Wireless
Station List link to view the list, shown below.
For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the
device is allowed to communicate with the wireless access point or not).
Note that if the wireless access point is rebooted, the table data is lost until the wireless access
point rediscovers the devices. To force the wireless access point to look for associated devices,
click the Refresh button.
Note: A wireless network can include multiple wireless access points, all using the same network
name (SSID). This enables extending the reach of the wireless network and allows users to roam
from one access point to another, providing seamless network connectivity. Under these
circumstances, be aware that only the stations associated with this access point will be presented in
the Available Station List.
Table 4-1. Statistics Fields
Field Description
Wired Ethernet Received/Transmitted
Packets The number of packets sent since the WG102 was restarted.
Bytes
The number of bytes sent since the WG102 was restarted.
For Each Wireless Security
Profile
Received/Transmitted
Unicast Packets The Unicast packets sent since the WG102 was restarted.
Broadcast Packets The Broadcast packets sent since the WG102 was restarted.
Multicast Packets The Multicast packets sent since the WG102 was restarted.
Total Packets The Wireless packets sent since the WG102 was restarted.
Total Bytes The Wireless bytes sent since the WG102 was restarted.
Refresh button
Click the Refresh button to update the statistics on this screen.