Quick Reference Guide

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Management 4-3
November 2005
Table 4-1. General Information Fields
Field Description
Access Point Information
Access Point Name
(NetBIOS name)
The default name may be changed if desired.
Country/Region
Displays the domain or region for which the wireless access point is
licensed for use. It may not be legal to operate this wireless access
point in a region other than one of those identified in this field.
Firmware Version The version of the firmware currently installed.
Access Point Mode
Identifies the operating mode of the WG102: Access Point,
Point-to-point bridge, Multi-point bridge or Repeater.
VLAN (802.1Q) Indicates if VLAN support is enabled. The default is diabled.
Management VLAN ID Displays the VLAN ID.
Current IP Settings
IP Address The IP address of the wireless access point.
Subnet Mask The subnet mask for the wireless access point.
Default Gateway The default gateway for the wireless access point communication.
DHCP Client
Enabled indicates that the current IP address was obtained from a
DHCP server on your network. Disabled indicates a static IP
configuration.
MAC Address
Displays the Media Access Control address (MAC address) of the
wireless access point’s Ethernet port.
Current Wireless Settings
Channel/Frequency
Identifies the channel the wireless port is using. 11 is the default
channel setting. See
http://documentation.netgear.com/reference/enu/wireless/index.htm
for the frequencies used on each channel.
Security Profiles
For each Security Profile, the following are displayed: Profile name,
SSID, security option, VLAN ID, and enabled/disabled.