Quick Reference Guide

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

Basic Installation and Configuration 3-25

November 2005

Click Security Profiles Settings in the Security menu of the WG102, select the profile you

choose to configure, and click Edit to view the Security Profiles Configuration menu.

Figure 3-14: WEP/WPA Settings menu

Choose WPA-PSK from the list.

4. Enter the pre-shared key passphrase.

5. Click Apply to save your settings.

How to Configure WPA2 with Radius

Note: Not all wireless adapters support WPA2. Furthermore, client software is required on the

client. Make sure your client card supports WPA2. Consult the product document for your wireless

adapter and WPA2 client software for instructions on configuring WPA2 settings.

To configure WPA2, follow these steps:

1. Log in at the default LAN address of http://192.168.0.229 with the default user name of

admin and default password of password, or using whatever LAN address and password you

have set up.