Reference Manual

Configure the System and Network Settings and Register the Licenses
99
ProSAFE Wireless Controller WC9500
Add a DHCP Server
The DHCP Server List screen lets you add a DHCP server pool.
 To add a DHCP server and configure its settings:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Configuration > System > DHCP Server.
The DHCP Server List screen displays. The following figure shows part of the DHCP
Server List screen. Because this screen is wide, it is shown in the following two figures: