Reference Manual

Configure the System and Network Settings and Register the Licenses
97
ProSAFE Wireless Controller WC9500
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Configuration > System > IP/VLAN.
The IP Settings screen displays:
5. Configure the settings as described in the following table.
Setting Description
IP Settings section
IP Address Enter the IP address of the wireless controller.
The default IP address is 192.168.0.250. To change it, enter an available IP
address from the address range used on your LAN.
IP Subnet Mask Enter the subnet mask value used on your LAN.
The default value is 255.255.255.0.
Default Gateway Enter the IP address of the gateway for your LAN.