Reference Manual

RF Planning and Deployment
63
ProSAFE Wireless Controller WC9500
The floor map displays.
7. Click the Duplicate
icon.
A pop-up screen displays.
8. Specify a name for the floor and select a building:
a. Enter a name for the new floor
.
b. From the Workspace tree, select the building to which you want to add the new floor.
c. Click the
Confirm button.
The new floor is added to the building.
Remove a Single Floor
You can remove a single floor from a building. However, you cannot remove the default floor
of the default building.
 To remove a single floor:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Plans > Layout.
The screen displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor
.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the
T
rashcan icon.
8. Confirm the removal.
The floor is removed.