Reference Manual

RF Planning and Deployment
60
ProSAFE Wireless Controller WC9500
7. Click the Area icon.
8. Click the area on the map.
9. Click the Delete link.
10. Click the Save
icon.
The changes are saved.
11. To remove another area, repeat Step 7 though Step 10.
Change the Name, Map, or Dimensions of a Floor
You can change the basic properties of a floor, including those for the default floor.
 To change the name, map, or dimensions of a floor:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Plans > Planning.
The screen displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor
.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Edit
icon.
The floor plan information displays in a pop-up screen.
8. Change the name or dimensions of the floor, upload another floor map, or perform a
combination of these actions.
For more information about the floor settings, see Add a Single Floor to a Building
on
page 51.
9. Click the Confirm button.
The changes are saved.