Reference Manual

RF Planning and Deployment
53
ProSAFE Wireless Controller WC9500
d. Click the Confirm button.
The floor map is uploaded and displays onscreen.
8. Click the Save
icon.
The changes are saved.
Scale a Floor
If you did not specify the floor width or floor length while adding a new floor (see Add a
Building and Floors on page 49 or Add a Single Floor to a Building on page 51), you can do
so by scaling the floor. You must know the distance in meters or feet between two known
points on the floor.
 To scale a floor:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Plans > Planning.
The screen displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor
.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the
Scale
icon.
8. Select a line between two points on the map by anchoring the line at one point and releasing
the line at the other point.
The points do not need to cover the entire length or width of the floor.
The Scale Map pop-up screen displays.
9. Select Meter or Feet from the menu and enter the distance between the two points.
10. Click the Confirm button.