Reference Manual

Troubleshooting
344
ProSAFE Wireless Controller WC9500
The Ping screen displays:
5. In the Ping Count field, enter the number of ping packets to be sent.
The default number is 10.
6. From the Access Point menu, select the access point to be pinged.
After you make your selection, the IP address of the access point displays in the IP
Address field.
7. Click the Start button.
The results are shown in the Ping Result field.
Trace a Route to an Access Point
You can trace a route to verify the route from the wireless controller to an access point.
 To trace a route to an access point:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.