Reference Manual

Monitor the Wireless Network and Its Components
316
ProSAFE Wireless Controller WC9500
The following table describes the fields of the Clients table:
Item Description
Select The radio button that lets you select the client.
MAC The MAC address of the wireless client.
IP The IP address of the wireless client.
Note the following:
• If clients and the access point to which they are connected are in the same
VLAN, all receive an IP address from the same DHCP server
.
• If clients and the access point to which they are connected are not in the
same VLAN, you must provide a DHCP server for the client VLAN.
• If clients are not connected to any DHCP server
, IP addresses in the
169.254.x.x. range are assigned automatically.
Location The location of the access point (see
Change Access Point Information on the
Managed AP List on page 165) to which the wireless client is connected.
AP-Name The name of the access point (see Change Access Point Information on the
Managed AP List on page 165) to which the wireless client is connected.
AP-IP The IP address of the access point to which the wireless client is connected.
AP-MAC The MAC address of the access point to which the wireless client is connected.
Client Type The wireless mode that the wireless client is using to connect to the access point
(802.1
1ng,
802.11 bg, 802.11 b, 802.11na, or 802.1
1a).
Usage (KBytes) The traffic usage of the wireless client in KB.