Reference Manual

Monitor the Wireless Network and Its Components
304
ProSAFE Wireless Controller WC9500
12. Click the OK button.
The Client Details screen closes, and the network Clients screen displays again.
View the Profiles in the Network
You can view all security profiles on the managed access points and see which wireless
controller manages a particular access point.
 To view the network Profiles screen:
1. Open a web browser. In the browser
’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
Frequency The channel frequency that the wireless client is using to connect to the
access point.
Auth The security mode that the wireless client is using to connect to the access
point (Open, WEP, WPA
, WPA2, or WPA/WPA2).
Client Type The wireless mode that the wireless client is using to connect to the access
point (802.11ng
, 802.11bg, 802.11b, 802.11na, or 802.11a).
Cipher The type of encryption that the wireless client is using (WEP, AES, TKIP, or
TKIP + AES).
AID The association ID of the client.
RSSI The received signal strength indicator (RSSI) of the wireless client.
Tx Power The transmit power of the wireless client.
Tx Rate The transmit rate in Mbps of the wireless client.
Tx Bytes The number of bytes that the wireless client transmitted.
Rx Rate The receive rate in Mbps of the wireless client.
Rx Bytes The number of bytes that the wireless client received.
Tx Packets The number of packets that the wireless client transmitted.
Rx Packets
The number of packets that the wireless client received.
Item Description