Reference Manual

Monitor the Wireless Network and Its Components
300
ProSAFE Wireless Controller WC9500
11. Click the OK button.
The AP Details screen closes, and the network Access Point screen displays again.
View the Clients in the Network
You can view all clients that are connected to managed access points and see which wireless
controller manages a particular access point.
 To view the network Clients screen:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Monitor > Network > Clients.
Because this screen is a wide screen, it is shown in the following two figures: