Reference Manual

Manage Stacking and Redundancy
286
ProSAFE Wireless Controller WC9500
The Redundancy screen displays.
5. Select the Enable Redundancy check box.
The Redundancy screen expands to display the Redundancy table, and the Secondary
Controller Information pop-up screen displays.
6. Configure the settings as described in the following table.
Setting Description
Controller IP Enter the local IP address of the redundant controller. This IP address remains
assigned to the redundant controller to allow it to be identified before and after a
failover.
UserName The user name is a nonconfigurable field that displays the user name with which you
logged in to the web management interface of the wireless controller.
Password Enter the password to access the redundant controller.
7. Click the Apply button.
The changes are saved. The local IP address of the redundant controller is displayed in
the Secondary IP field above the Redundancy table.
8. Configure the VRRP IDs and local IP addresses of the controllers in the stack so they can
become part of the redundancy group.