Reference Manual

Manage Stacking and Redundancy
285
ProSAFE Wireless Controller WC9500
The following figure shows an N:1 configuration with three primary controllers and one
redundant controller after a failover occurs:
Figure 18. Primary and redundant controllers in an N:1 configuration after a failover
Configure a Redundancy Group with N:1 Redundancy
To enable N:1 redundancy, configure the redundancy settings on the primary and redundant
controllers. An N:1 redundancy group includes two or three primary controllers.
 To configure N:1 redundancy:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Stacking > Stacking/Redundancy.