Reference Manual

Maintain the Wireless Controller and Access Points
258
ProSAFE Wireless Controller WC9500
 To view rate-limit events:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Maintenance > Logs &
Alerts > Rate Limit.
The Rate Limit screen displays:
5. If the table contains many entries, navigate through the table by using the following buttons
and menu that display at the bottom of the table:
• T
o move to the next page, click the Next button.
• To move to the previous page, click the Previous button.
• To change the number of entries onscreen, from the Entry Per Page
menu, select
20
, or 40, or 60, and so on, or All.
6. (Optional) Click one of the following buttons:
• Refresh. Displays the latest events onscreen.
• Clear All. Clears all events from the screen and from memory.
NETGEAR recommends that you export the events before you clear them.