Reference Manual

Maintain the Wireless Controller and Access Points
249
ProSAFE Wireless Controller WC9500
6. Click the Apply button.
The changes are saved.
Specify Session Time-Outs
If an HTTP session times out, the user is redirected to the login screen for password
verification.
 To specify the length of the HTTP session time-out for the wireless controller:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Maintenance > Remote Management > Session T
imeout.
The Session
Timeout screen displays:
5. In the Timeout (minutes) field, specify number of minutes before an active HTTP login
session expires.
The default session time-out is 5 minutes.
Trap Port Enter the port on which the SNMP manager receives traps sent from the
wireless controller.
The default setting is port 162.
SNMP Manager IP Enter the IP address of the SNMP manager.
To allow any SNMP manager to access the wireless controller, keep this
field blank.
Setting Description