Reference Manual

Maintain the Wireless Controller and Access Points
247
ProSAFE Wireless Controller WC9500
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Maintenance > Extended Storage.
The following screen shows information about an attached USB memory stick.
5. Mount or unmount the external storage device:
• To mount the external storage device, do the following:
a. Attach the external storage device to the USB port on the front panel of the
wireless controller.
b. Click the Mount
button.
The storage details become visible on the Extended Storage screen.
• T
o unmount the external storage device, do the following:
a. Click the Unmount
button.
b. Remove the external storage device from the USB port.
Manage Remote Access
Enable SNMP to allow SNMP network management software, such as HP OpenView, to
monitor the wireless controller by using SNMPv1 or SNMPv2c protocol.
You can configure the wireless controller through SNMP, except for the following features:
• Guest access management
• RF management
• Stacking management
Note: The wireless controller supports SSH through the console port.
However, the console port is for debugging under guidance of
NETGEAR technical support only.