Reference Manual

Manage Rogue Access Points, Guest Network Access, and Users
226
ProSAFE Wireless Controller WC9500
7. Configure the client settings as described in the following table.
Setting Description
User Name Enter a unique user name. Only alphanumerical characters and underscore
characters (_) are supported.
Password Enter a password in the Password field.
Confirm the password in the Confirm Password field.
Authentication Type From the menu, select one of the following protocols:
• EAP. Extensible
Authentication Protocol.
• PEAP. Protected EAP.
8. Click the Apply button.
The changes are saved. The client is added to the table on the User Management
screen.
Add a Captive Portal Account
If you configure a captive portal (see Configure a Portal on page 218), you can add a captive
portal account.
Note: If you configure a guest portal, you cannot add a captive portal account.
 To add a captive portal account:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Maintenance > User Management.
The User Management screen displays with the Management tab and associated screen
in view
.
5. Click the Captive Portal Account tab.