Reference Manual

Configure Wireless and QoS Settings
193
ProSAFE Wireless Controller WC9500
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Configuration > Wireless > Basic > RF Management.
The basic RF Management screen displays:
5. Configure the settings as described in the following table.
Setting Description
TX Power Settings
Default Tx Power Make a selection from the menu to specify how the transmission (Tx)
power is configured on the access points: Full, Half, Quarter, Eighth,
or Minimum. By default, the selection from the menu is Half.
When automatic Tx power control is enabled, the selection from the
menu is used as the initial power level for the access points.