Reference Manual

Discover and Manage Access Points
164
ProSAFE Wireless Controller WC9500
The Managed AP List screen shows the following entries for each access point that you
added to the list:
Item Description
IP The IP address of the access point.
MAC The MAC address of the access point.
Model The model of the access point.
Name The name of the access point.
Status Shows one of the following status options:
• Authentication in progress.
This status can last several minutes.
• Applying configurations.
• Firmware upgrade.
• AP is rebooting.
• Connecting
. Make sure that a DHCP server is enabled in the network;
otherwise, the managed access points remain in the Connecting state and do
not enter the Connected state.
• Connected. This
status indicates
normal operation.
• Not Connected. The wireless controller cannot communicate with the access
point at the configured IP address. The wireless controller tries to log in to
managed access points each minute. If the error is temporary
, the status
automatically changes to Connected. If the error is prolonged, verify the
access point’s IP address and network connectivity. For more information, see
Resolve Problems with Access Points on page 342.
Site Shows whether you designated the access point as a local or remote one:
• Local.
The access point is designated as a local.
• Remote. The access point is designated as remote.
For more information about designating an access point as local or remote, see
Discover Access Points with the Discovery W
izard on page 154.
Group Name The default group is basic. For information about changing the group for an access
point, see Change Access Point Information on the Managed AP List on page 165.