Reference Manual

Discover and Manage Access Points
155
ProSAFE Wireless Controller WC9500
Note: Make sure that DHCP option 43 (vendor-specific information) is
enabled on an external DHCP server. For more information, see
General Discovery Guidelines on page 153.
 To discover access points in the factory default state and access points in a Layer 2
subnet:
1. Open a web browser. In the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Access Point > Discovery W
izard.
The Discovery Wizard Step 1 of 2 : Choose state of
Access Points screen displays:
5. Select the Out of Factory and L2 Subnet APs radio button.
Note: The I am not sure radio button directs you to the product
documentation.
6. Click the Next button.