Reference Manual

Manage Security Profiles and Profile Groups
126
ProSAFE Wireless Controller WC9500
The following table describes the fields that are shown for each profile in a profile group.
Setting Description
Name The unique profile name.
Radio The wireless radio in which the profile is operating.
Authentication The authentication setting under which the profile is operating.
Remove an Advanced Profile Group
You can remove an advanced profile group
 To remove an advanced profile group:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Configuration > Profile >
Advanced > Radio.
The Profile Groups screen displays.
5. Click the tab for the profile group that you want to remove.
6. Click the Delete button.
Note: A separate procedure to change profile groups does not exist. You
change profile groups by adding, removing, or changing profiles in the
profile group.
Configure a Profile in an Advanced Profile Group
For each profile group, the Edit Profile (Group-X, in which X is the group number) screen lets
you create and configure up to 8 security profiles per wireless radio (8 profiles for a
single-band access point; 16 profiles for a dual-band access point). Separate profiles are
applied to 802.11b/bg/ng-mode and 802.11a/na-mode radios.