Reference Manual

Configure the System and Network Settings and Register the Licenses
111
ProSAFE Wireless Controller WC9500
The Log Settings screen displays:
5. In the Syslog Settings section of the screen, configure the settings as described in the
following table.
Setting Description
Enable Syslog Enable the syslog settings, if your network includes a syslog sever.
Syslog Server IP Address Enter the IP address to which the wireless controller and managed access
points send all syslogs, if the Enable Syslog check box is selected.
Note: Before you configure the IP address of the syslog server on the wireless
controller, make sure that you set up a syslog server (such as a computer running
a syslog service) and that the syslog server is available on the network.
Server Port Number Enter the number of the port at which your syslog server is configured to listen to
requests.
Log Level From the Log Level menu, select one of the following levels:
• LOG_LEVEL_CRIT. Critical errors only are logged.
• LOG_LEVEL_ERR. Noncritical errors and critical errors are logged.
• LOG_LEVEL_W
ARN. W
arnings, noncritical errors, and critical errors are
logged.
• LOG_LEVEL_NOTICE. Notifications, warnings, noncritical errors, and
critical errors are logged.
• LOG_LEVEL_INFO. Informational messages, notifications, warnings,
noncritical errors, and critical errors are logged.
6. Click the Apply button.
The changes are saved.