Reference Manual

Configure the System and Network Settings and Register the Licenses
109
ProSAFE Wireless Controller WC9500
 To configure the log settings and view the logs:
1. Open a web browser. In the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login screen displays.
2. Enter your user name and password.
If you did not yet personalize your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
4. Select Configuration > System >
Alerts/Logs > Logs/Syslog.
The Log Settings screen displays:
5. In the Log Settings section of the screen, configure either event tracing or a log level (these
selections are mutually exclusive):
• Event tracing.
To configure event tracing:
a. Select the
Event Tracing check box.
b. Next to Time Duration, use the menus to specify the period during which event
tracing must occur
.
• Log level. From the Log Level menu, select one of the following levels:
- LOG_LEVEL_CRIT. Critical errors only are logged.
- LOG_LEVEL_ERR. Noncritical errors and critical errors are logged.
- LOG_LEVEL_W
ARN. W
arnings, noncritical errors, and critical errors are logged.