Quick Reference Guide

Manage Security Profiles and Profile Groups
87
ProSAFE Wireless Controller WC9500
The basic Authentication Server screen displays. The following figure shows the fields for
an external LDAP server:
2. Select the radio button that corresponds to the authentication server that you want to set up:
• External RADIUS Server
• Internal Authentication Server
• External LDAP Server
3. Configure the settings that correspond to the selected authentication server as described in
the following table:
Setting Description
External
RADIUS
Server
Enable Authentication Select this check box to enable authentication.
Enable Accounting Select this check box to enable accounting.
Primary Server Do the following for each server:
1. Specify the IP address.
2. Specify the port.
The default port is 1812.
3. Specify the shared secret.
For information about
shared secret
requirements, see
Table 6 on page 207.
Secondary Server
Reauthentication time
(Seconds)
Specify the time (in seconds) after which reauthentication occurs
for all wireless clients.
Update Global Key
Every (Seconds)
To enable update of the global key:
1.
Select this check box.
2. Specify the interval (in seconds) after which the global key is
updated for all wireless clients.