Quick Reference Guide

Manage Security Profiles and Profile Groups
83
ProSAFE Wireless Controller WC9500
3. Add wireless clients to the Selected Wireless Clients list through one of the following
methods:
• The MAC address that you want to add is in
A
vailable Wireless Clients list, which
contains wireless stations that are present in the vicinity of the access point:
a. Select the MAC address from the A
vailable Wireless Clients list.
b. Click Move.
• The MAC address that you want to add is not in Available Wireless Clients list:
a. Enter the MAC address in the MAC Address field.
b. Click Add
.
4. Click Apply.
 To remove a MAC address from the Selected Wireless Clients list:
1. Select the check boxes that correspond to the MAC addresses that you want to remove.
2. Click Delete.
3. Click Apply.
For information about how to add a MAC ACL to a security profile in the basic profile group,
see Configure Profiles in the Basic Profile Group on page 67.
For information about how to add a MAC ACL to a security profile in an advanced profile
group, see Configure Profiles in an Advanced Profile Group on page 73.
Import a MAC List from a File
You can import a precompiled list of MAC addresses from a saved file. This file needs to be a
simple text file with one MAC address per line.
 To import a MAC list from a file:
1. Create a text file that includes a list of MAC addresses.
Each MAC address should be on a separate line with hard returns between lines as
shown in the following example:
00:00:11:11:22:29
00:00:11:11:22:28
00:00:11:11:22:27
00:00:11:11:22:26
00:00:11:11:22:25
2. Select Configuration > Security > Basic > MAC ACL.
The basic MAC Authentication screen displays.
3. Click Browse, navigate to the file containing the list of MAC addresses, and select it.
4. Make one of the following selections from the Import MAC List from a file menu:
• Merge. Merges the list of MAC addresses that you intend to import with those that are
already present in the Selected Wireless Clients list.
• Replace. Replaces the MAC addresses that are present in the Selected Wireless
Clients list with those in the file that you intend to import.