Quick Reference Guide

Manage Security Profiles and Profile Groups
79
ProSAFE Wireless Controller WC9500
WPA with Radius TKIP
TKIP + AES
To configure WPA authentication with a RADIUS server:
1. Set up and enable an internal or external (RADIUS or LDAP)
authentication server.
For information, see
Manage Authentication Servers and
Authentication Server Groups on page 85.
2. From the Data Encryption menu, select the type of
encryption:
- TKIP. Supports T
emporal Key Integrity Protocol (TKIP)
only.
- TKIP +
AES. Supports both TKIP and Advanced
Encryption Standard (AES).
3.
Select the Local or External radio button.
4. If you select the External radio button, select the
authentication server that you wish to use from the menu.
WPA2 with Radius AES
TKIP + AES
To configure WPA2 authentication with a RADIUS server:
1. Set up and enable an internal or external (RADIUS or LDAP)
authentication server.
For information, see
Manage Authentication Servers and
Authentication Server Groups on page 85.
2. From the Data Encryption menu, select the type of
encryption:
- AES. Supports AES only
.
- TKIP + AES. Supports both TKIP and AES.
3.
Select the Local or External radio button.
4. If you select the External radio button, select the
authentication server that you wish to use from the menu.
WPA & WPA2 with Radius
Note: Use this option if
there are both WPA and
WPA2 clients in the
network.
TKIP + AES To configure WPA & WPA2 authentication with a RADIUS server:
1. Set up and enable an internal or external (RADIUS or LDAP)
authentication server
.
For information, see
Manage Authentication Servers and
Authentication Server Groups on page 85.
2. Select the Local or External radio button.
3. If you select the External radio button, select the
authentication server that you wish to use from the menu.
Note: The Data Encryption menu displays TKIP + AES, which is
the only available option. Both TKIP and AES are supported.
Table 3. Network authentication and data encryption settings (continued)
Network Authentication
Selection
Data Encryption
Options
Configuration Steps