Quick Reference Guide

Manage Security Profiles and Profile Groups

ProSAFE Wireless Controller WC9500

5. Click the tab for the profile that you want to edit.

6. Change the settings.

For information about how to change the settings, see Configure Profiles in an Advanced

Profile Group on page 73.

7. Click Apply.

 To remove an existing profile from an advanced profile group:

1. Select Configuration > Profile > Advanced > Radio.

The Profile Groups screen displays.

2. Click the tab for the profile group for which you want to remove a profile.

3. Click Edit

The Edit Profile (Group-X) screen displays.

4. Click the tab for the radio for which you want to remove a profile.

5. Click the tab for the profile that you want to remove.

6. Click Delete.

7. Confirm that you want to delete the profile.

Network Authentication and Data Encryption Options

This section describes the detailed network authentication and data encryption options that

are part of the procedures in Configure Profiles in the Basic Profile Group on page 67 and

Configure Profiles in an Advanced Profile Group on page 73.

Table 3 on page 78 shows the data encryption options based on the network authentication

that you select on the Edit Profile (Basic) or Edit Profile (Group-X) screen, and the required

configuration steps to implement the selected network authentication.

Note: On the Edit Profile (Basic) or Edit Profile (Group-X) screen, for any

selection from the Network Authentication menu that requires a

RADIUS server, authentication is not restricted to a RADIUS server;

you can also use an internal authentication server or an external

LDAP server.

Note: You can configure either MAC authentication with an external

RADIUS server or network authentication with an external RADIUS

server, but not both. That is, if you configure external MAC

authentication, you cannot use an external RADIUS server with

WPA, WPA2, or WPA & WPA2.